PCIe to 2 Ports SATA 3 III 3.0 6Gbps SSD Adapter PCI-e PCI Express x1 Controller Board Expansion Card Support x4 x6 x8 x16 Riser
About Description:
1. Compliant with Serial ATA Specification 3.0, down compatible with SATA2.0 SATA1.0.
2. Conformance to PCI-Express v2.0 specifications, down compatible with PCI-Express v1.0.
3. Supports communication speeds of 6.0Gbps,3.0Gbps and 1.5Gbps.
4. Supports Gen 1i,Gen 2i,Gen 2m, Gen 2x and Gen 3i.
5. Supports two SATA Ports.
6. Supports AHCI 1.0 and IDE modes.
7. Supports Native Command Queuing(NCQ)
8. Supports Port Multiplier FIS based switching or command based switching.
9. Supports Hot Plug and Hot Swap.
10. Compatible with SATA 6G,3G and 1.5G Hard Drives Specification:
Product interface: PCI-E 1X 4X 8X 16X
Chipest: JMB582
Support specification: SATA3.0 7PIN
Bus interface: PCI-Express X1 slot
Extension interface: 2 SATA3.0 interfaces
System requirements: there is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16
Operating system: Windows10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux
Reminder: Speed is related to many factors: computer configuration, slot bandwidth, hard drive itself,
The platform environment and speed measurement software will affect the speed. All expansion cards in this store are not guaranteed
How much speed can you achieve in actual use.
If you want the so-called high-speed, please change the motherboard directly.
1. The best effect can be achieved with SATA3.0 data cable
2. PCI-E must have a slot above V2.0 (GEN2), if V1.0 (GEN1), the speed is
140M-200M, PCI-E whether it is X1 or X16, as long as it is V2.0 version,
If there is a spare X16 slot, just plug it into the X16 slot. Only 16X is GEN2 for motherboards below H81.
1X is GEN1, if you want high speed, please plug it into the 16X graphics card slot.
3. Motherboard BIOS setting: SATA mode should be changed to AHCI, although some motherboards PCIE is version 2.0
Yes, but BOIS does not enable high-speed transmission mode by default (gen2 high speed mode)
Need to be turned on manually.
Reminder: As Lenovo and DELL computers have shielded the BIOS interface of the third-party array card,
It may cause unpredictable compatibility problems. Please be careful when purchasing array cards from Lenovo and Dell computer users.
Place the order carefully, thank you for your cooperation!
SATA3.0 expansion card in PCI-E various speed comparison: (for reference only)
PCI-E 1.0 GEN1 140-200M
PCI-E 2.0 GEN2 350-400M
PCI-E 3.0 GEN3 360-410M
Note:
Connection conditions and solutions of system disk and PCIE to SATA3.0 adapter card:
Second, the connection conditions and solutions of ordinary disk and PCIE to SATA3.0:
You’ll receive:
1 x PCI-E to SATA 3.0 Extension Card
1 x Small and Big Bracket
1 x Screw
-
Please check pictures for more details.
Real customer reviews